Parts and Components
Let’s face it, eventually a component on your system will need replaced. Whether it is a regularly scheduled consumable part, a part you should have on stand-by when commissioning the system, a critical spare to keep on hand to minimize down-time in case of failure, or just a replacement part, STT has you covered.
We offer a complete line of parts and components to keep your system running smoothly and efficiently. Our offering ranges from dust filters to grit screens and screws to mixers, pumps, and everything in-between.
Don’t have an STT system? No problem, parts are available for both non-STT and STT designed systems.
Ordering and Inventory
Ordering your replacement parts through STT is quick and easy. We have a large inventory available for quick order turn-around at competitive prices. Trust the experts to ensure you get the support to replace the right part.
Parts and Components Replacement Duration
|Component||Typical Replacement Duration||Additional Notes|
|Bag Filter||Bags: Every 6 months; Cages: Every 5 years|
|Cartridge Filters||Every 6 months|
|Slaker Wear Liner||Between 1-5 years||Perform annual inspection with thickness measurement|
|Slaker Agitator (with paddles and stubshafts)||Upon failure or excessive wear||These are made to order and can have a 6-8 week lead time – consider having a spare on-hand|
|Slaker Seals||Typically every 3-6 months or when lime is leaking||Replace promptly to extend life of stubshafts|
|Grit Screens||Upon failure||Recommend to have a spare on-hand|
|Flex Joints||Between 1-5 years||Inspect regularly, replace when wear is noticed|
|Scrubber Nozzle||Upon failure or excessive wear||Recommend to have a spare on-hand|
|Belts, Chain, Sheaves, Sprockets, Bearings||Upon failure or excessive wear||Recommend to have a spare on-hand|
|Feeder Screw||Upon failure or excessive wear||Recommend to have a spare on-hand|