Knowledge Center
Liquid Lime Slurry Storage Tank
Posted December 08, 2022
The mobile lime slurry storage tank from STT is a horizontal, portable carbon steel storage tank, ideal for storing lime slurry received via a tanker truck or as a direct feed via a detention slaker. View the complete Data Sheet.
Quicklime, Hydrate or Lime Slurry
Posted March 07, 2022
When it comes to deciding on a lime product for water and wastewater treatment, you have three basic choices. There is quicklime and hydrated lime—both of which are dry bulk products. And then there are ready-made lime slurries. So, how do you decide what lime is the right lime for you? Here is what you need to know.
Lime Injection System for EAF Steel Plants Brochure
Posted August 12, 2022
In today’s electric arc furnace (EAF) steel plants, operating more efficiently increases the competitive advantage of that plant. One way to improve operating efficiency is through the installation of a lime injection system from Storage & Transfer Technologies (STT), a wholly owned subsidiary of Carmeuse. Our system stands out in the industry through a partnership with Schenck Process
Mobile Lime Slaker System
Posted March 25, 2022
STT understands that your project might require a mobile lime slaker system as a turnkey solution. View the complete STT Mobile Lime Slaker System Data Sheet.
Automation and Controls
Posted April 01, 2022
At STT, we know how important it is that everything runs smoothly at your plant. Automated systems help you to achieve this goal.
Bin Vent Filter Square/Rectangular
Posted March 14, 2022
The square/rectangular bin vent filter from STT is designed to vent displaced air from storage silos or bins during filling by a pneumatic or mechanical convey system.
Bin Vent Filter Cylindrical
Posted March 14, 2022
The cylindrical bin vent filter from STT is designed to vent displaced air from smaller storage hoppers or scaling bins that are gravity fed by screws, conveyors, or other equipment, where dust particles must be contained or controlled.
I-2 Impactor
Posted March 25, 2022
The I-2 Impactor from STT is designed to aid the flow of dry bulk materials that tend to stick, bridge or compact in storage tanks or hoppers.
Wetting Bowl
Posted March 25, 2022
The wetting bowl is an ancillary device installed on top of a lime slaker or mixing tank feed inlet port to minimize wet bulk material from plugging.