Knowledge Center
STT General Capabilities
Posted August 01, 2019
With over 50 years of experience, we understand your application and plant requirements are unique.
Standard Quicklime Feed System in a Box
Posted March 25, 2022
Learn more about this system which includes a three-piece modular design with a 12 ft. storage silo with a bin vent filter, a ZMI Portec detention slaker module on the upper level, and a slurry storage tank module on the lower level under the lime silo.
Standard Hydrated Lime and Soda Ash Feed System in a Box
Posted March 25, 2022
Learn about the standard hydrated lime and soda ash feed system from STT which provides an integrated solution for receiving, storing, feeding, and delivering up to 2,500 lbs/h of hydrated lime or soda ash from truck to the point of application.
Standard Hydrated Lime and Soda Ash Feed System in a Can
Posted March 25, 2022
Learn more about the standard hydrated lime and soda ash feed system which includes an integrated silo, feed, and dust collection system in a can.
Mobile Lime Slaker System
Posted March 25, 2022
STT understands that your project might require a mobile lime slaker system as a turnkey solution. View the complete STT Mobile Lime Slaker System Data Sheet.
Bin Vent Filter Square/Rectangular
Posted March 14, 2022
The square/rectangular bin vent filter from STT is designed to vent displaced air from storage silos or bins during filling by a pneumatic or mechanical convey system.
Bin Vent Filter Cylindrical
Posted March 14, 2022
The cylindrical bin vent filter from STT is designed to vent displaced air from smaller storage hoppers or scaling bins that are gravity fed by screws, conveyors, or other equipment, where dust particles must be contained or controlled.
I-2 Impactor
Posted March 25, 2022
The I-2 Impactor from STT is designed to aid the flow of dry bulk materials that tend to stick, bridge or compact in storage tanks or hoppers.
Wetting Bowl
Posted March 25, 2022
The wetting bowl is an ancillary device installed on top of a lime slaker or mixing tank feed inlet port to minimize wet bulk material from plugging.
Forced Draft Wet Scrubber
Posted March 25, 2022
The forced draft wet scrubber is used for applications where lime is being slaked and where any dry chemical is being added to a liquid to capture the dust or vapor.