News & Resources
STT Line Card
Posted January 12, 2021
Learn about all of the systems, products, and services STT has to offer to address your bulk handling, slaking, and aftermarket needs. Review the STT Line Card.
ZMI Portec Detention Lime Slaker
Posted March 13, 2021
The ZMI Portec Detention Slaker from STT slakes quicklime (particle size up to ¾”) and produces slurry with up to 30% solids.
Mobile Lime Slaker System
Posted January 14, 2021
STT understands that your project might require a mobile lime slaker system as a turnkey solution. View the complete STT Mobile Lime Slaker System Data Sheet.
I-2 Impactor
Posted July 16, 2021
The I-2 Impactor from STT is designed to aid the flow of dry bulk materials that tend to stick, bridge or compact in storage tanks or hoppers.
Wetting Bowl
Posted June 04, 2021
The wetting bowl is an ancillary device installed on top of a lime slaker or mixing tank feed inlet port to minimize wet bulk material from plugging.
Forced Draft Wet Scrubber
Posted June 04, 2021
The forced draft wet scrubber is used for applications where lime is being slaked and where any dry chemical is being added to a liquid to capture the dust or vapor.
RV Series Standard Rotary Airlock Valve
Posted April 20, 2021
The RV Series Standard Rotary Airlock Valve (round flange) is ideal for the pneumatic conveying of dry, free flowing, noncohesive bulk density products or powders.
RVS Series Standard Rotary Airlock Valve
Posted April 20, 2021
The RVS Series Standard Rotary Airlock Valve (square flange) is ideal for the pneumatic conveying of dry, free flowing, noncohesive bulk density products or powders.
CV Series Conveying Rotary Airlock Valve
Posted April 20, 2021
The CV Series Conveying Rotary Airlock Valve is designed to handle most types of dry granulated materials including difficult, sticky products in pneumatic conveying systems with conveying pressure up to 15 psi.
PTFE Laminated Spunbonded 100% Polyester Cartridge Filter
Posted February 26, 2021
The PTFE laminated spunbonded 100% polyester cartridge filter consists of a membrane of PTFE (Polytetrafluoroethylene) laminated over a spunbonded polyester substrate that results in a microporous surface.